- 75 -
17.0 WEB interface
With PCT400 controller it is possibly to access the boiler trough internet.
It is possibly to see how the boiler is running, but what is more interesting, it is possibly to adjust nearly
all parameter with the WEB interface.
Some function is not safe to adjust remotely, and are therefore not possibly to change.
All the parameter is protected with a password, so you need to know that to be able to change any
parameter value.
To change a parameter, you just have to press the menu button, to get access to the menu as you know it
from the boiler
If you press the “Log” button, a new page will popup, with all the logging date, please see more in next
chapter
If the boiler is online for a time you will get curves, showing how it is running, as on the picture above.
To get the boiler connected to the internet, some setup at the service menu are needed, and to do that,
following information is needed.
1.
Extern IP address:
___-___-___-___
(Can be found by entering
www.myip.dk
in your browser).
2.
The stoker’s given IP address:
___-___-___-___
3.
Sub mask:
___-___-___-___
4.
Gateway:
___-___-___-___
5.
DNS:
___-___-___-___
6.
Password
___-___-___-___