KSB Amaprop 1200, Инструкция по монтажу и установке

Страница: 15 / 40

Amaprop R
15
Installing the braces incl. feet (size 1200--1801)
or
pre--assembled bracing (size 2000--2500 with adjustable
feet)
For mixer sizes 1200--1801, the guide rail is supported by four
separate braces with pre--assembled vertically adjustable feet
supplied on a wooden pallet.
Amaprop 1200--1801
For mixer sizes 2000--2500, the two braces on the right and left
hand sides, respectively, come welded to a bracing plate, thus
forming left and right bracing assemblies.
Amaprop 2000--2500 (with adjustable feet)
Prior to installation, loosen the bolting retainingthe feet on the
braces or bracing assemblies, so that the feet can be adjusted
vertically. Washers have to be fitted on both sides, i.e. under the
bolt heads and under the nuts.
Mount the braces or bracing assemblies with pre--assembled
feet on the pump bracket as shown in the two illustrations, using
hex. head bolts with washers and lock nuts on both sides.
(Do not tighten the bolts at this stage).
Amaprop 1200--1801
901
550
920
901 -- Hex. head bolts M16x70
920 -- Nuts M16
550 -- Discs A17 16-200 HV.
Amaprop 2000--2500
901.1
901.2
901.1
550
920
901.1 -- Hex. head bolts M20x80
901.2 -- Hex. head bolts M20x65
920
-- Nuts M20
550 -- Discs A21 20-200 HV.
Please note! Nuts with counternuts must always be fastened
on the outside of the pump bracket!