manualshive.com logo in svg

KSB Ama-Drainer-Box, Руководство по эксплуатации

Поделиться
Скачать
KSB Ama-Drainer-Box Скачать руководство пользователя страница 17

5 Installation at Site

17 of 72

Ama-Drainer-Box

5 Installation at Site

NOTE

All lifting units are supplied unassembled in the form of subassemblies. The
following sections describe the conditions which must be met to assemble the
individual subassemblies to form the complete waste water lifting unit in
accordance with the instructions and without compromising health and safety.

5.1 Safety regulations

 DANGER

Power supply not disconnected

Danger to life!

▷

Pull the mains plug and secure the pump against unintentional start-up.

 DANGER

Electrical connection work by unqualified personnel

Danger of death from electric shock!

▷

Always have the electrical connections installed by a trained and qualified
electrician.

▷

Observe regulations IEC 60364.

 DANGER

Unsuitable electrical installation

Danger to life!

▷

Make sure the electrical installation meets the VDE 0100 installation rules (i.e.
sockets with earthing terminals).

▷

Make sure the electric mains is equipped with a residual current device of
maximum 30 mA.

▷

Always have the electrical connections installed by a trained and qualified
electrician.

 DANGER

Improper use

Danger of death from electric shock!

▷

Any extension cords must match the quality of the power cable supplied with
the pump.

▷

Do not expose electrical connections or devices to moisture.

5.2 Checks to be carried out prior to installation

Before installing the lifting unit make sure that the following requirements are met:

▪

Check the data on the name plate of the lifting unit to make sure it can be
operated on the available mains.

▪

The fluid to be handled matches the description of suitable fluids.

▪

The above safety instructions have been complied with.

▪

The place of installation is frost-proof.

Содержание Ama-Drainer-Box









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды