14
the red button on the control handle until you reach the desired regulation among minimum/medium/
maximum, then release the button. Steam delivery is controlled by the trigger 50, Fig. 4) under the
handle. If you want to use the vacuum function without the possibility to inadvertently activate the
steam trigger, you can temporarily disable the steam by quickly pressing the corresponding red
button on the pistol grip, the graphics of the steam selection will be disabled; to re-enable just repeat
the pressure on the red button (the steam will be activated using the selected setting before switch
off). The machine can deliver steam only if there is water inside the tank, if during the use the water
level goes under the minimum, the “Lack of water” alarm activates.
When the alarm is on, the machine stops delivering steam (if the detergent / hydrojet function is
on, the machine stops this function too). In order to get back to the normal functioning switch the
machine off, unscrew the water tank cap, remove the tank and fill it with water. Now, switch the
machine on again and go on working.
7. STEAM AND DETERGENT CLEANING
(only for detergent function version)
It allows the mixing of steam with a special detergent which increases the cleaning power, this
function is achieved by means of a vibration pump, fishing detergent from the tank and mixes
intermittently detergent with steam through a metal union.
When the detergent is missing, an alarm activates and the display shows “Lack of detergent” alarm.
The LED light (A, Fig. 3) turns on and a beep duration of 5 seconds activates, after which it will remain
only the intermittent LED to remind us that the detergent is finished, without disturbing the user with
the continuous repetition of sound. It is possible to continue to work with only steam/vacuum. The
water is caught and mixed with steam and supplied from the hose. After lack of detergent alarm it is
necessary to fill in the tank and, after the acoustic sound stop, you can activate detergent function.
The control of the detergent function takes place through the green button (53) (Fig. 4.1) on the
handle, a quick press of the button will activated the function, repeating the operation it will be
interrupted. The detergent function can be selected in any condition but it may work only when at
least one of the two solenoid valves works (cannot be supplied without steam).
This function does not allow regulation (works according to a logic ON/OFF).
Caution: it is essential to use only Detergents approved by the manufacturer, the use of
detergents that are not approved / tested can cause damage to the machine and people to
whom the manufacturer does not may be responsible.
8. STEAM AND HYDROJET CLEANING
(only for hydrojet function version)
The control of the hydrojet function takes place through the light blue button (54) (Fig. 4.2) on the
handle, a quick press of the button under the handle will activate the function, repeating the operation
it will be interrupted. The hydrojet function can be selected in any condition but it may
work only when steam is activated. This function does not allow regulation (works according to a
logic ON/OFF).
Caution: when h ydrojet function is activated, hot water and steam come out of the
steam hose, at the same time pressure rapidly grows. Do not touch the steam jet coming
from the accessories.
When water in the tank is missing, an alarm activates a LED (E, Fig. 3), a writing on the display and a
5-second beep, after which it will remain only the intermittent LED to remind us that the water in the
Содержание KGV7000
Страница 2: ......
Страница 3: ...Fig 1 1 Fig 13 Fig 1 2 Fig 2 Fig 5 Fig 3 ...
Страница 4: ...Fig Fig 4 Fig 4 1 Fig 4 2 51 51 Fig 7 Fig 8 Fig 9 ...
Страница 5: ...4 Fig 10 Fig 11 Fig 12 ...
