11
3.4 DETERGENT TANK (only for detergent function version)
Unscrew the tank cap (6, Fig. 1.1) and pour detergent thinned with water.
WARNING: Use only the detergent recommended by the manufacturer. It’s strictly forbidden to
pour foaming detergents in the tank, or detergents which may develop toxic gases or irritating
substances when they come into contact with heat. If incompatible products are used, the
cleaner may be subject to irreparable damage.
3.5 HYDROJET TANK (only for hydrojet function version)
Unscrew the tank cap (6, Fig. 1.1) and fill in with water.
Caution: it is always essential to put the anti-limestone product into the tank water, otherwise
in a short time the pipes will be filled with limestone and the machine will fail quickly. The
manufacturer grants no warranty for problems resulting from failure / misuse of the anti-
limestone product, the use of a different product from KS Group anti-limestone product and in
general from damages caused by limestone.
3.6 SWITCHING ON
Plug the power supply cable (7) (Fig. 1.1) into a suitable socket, as stated on the technical
specifications label. Push the lower part of the main switch (12) (Fig.2). The green light on the switch
will illuminate.
3,7 FUNCTIONS PROGRAMMING
By operating the control handle, both the amount of steam to be released and the vacuum power
can be programmed. The device is supplied with electronic circuits which allow to optimize the
performance,
inline
with
the
specific
needs
of
the
user.
Содержание KGV7000
Страница 2: ......
Страница 3: ...Fig 1 1 Fig 13 Fig 1 2 Fig 2 Fig 5 Fig 3 ...
Страница 4: ...Fig Fig 4 Fig 4 1 Fig 4 2 51 51 Fig 7 Fig 8 Fig 9 ...
Страница 5: ...4 Fig 10 Fig 11 Fig 12 ...
