9
2. TECHNICAL SPECIFICATIONS
Schuko Version
Boiler Consumption
Pressure
Tension
Frequency
Pump power
Motor power
3200W
9/10 bar
230V
50 Hz
48 W
1200W
USA Version
Boiler Consumption
Pressure
Tension
Frequency
Pump power
Motor power
1750W
9/10 bar
120V
60Hz
41W
1000W
3. PRELIMINARY OPERATIONS
3.1 ASSEMBLING INSTRUCTIONS
Inside the packaging you will find the machine, a handle (1, Figure 1.1), a basket for accessories (2,
Fig 1.1), two tanks (5, 6, Figure 1.1), accessories and a bag containing the following components (Fig. 13):
13. sealing o-rings for accessories
14. five M4 screws (spare parts for housing)
15. Drainage key
16. Blowhole cap sponge
17. Waste bucket rectangular sponge
MOUNTING THE HANDLE (1, Figure 1.1) AND THE BASKET FOR ACCESSORIES (2, Fig 1.1)
The handle is a 20mm diameter tube that is useful to push the machine from the rear. You can find
it in the accessories box and it has to be put inside the two supports located at the rear of the
machine. This detail is also used as a support for the basket for accessories (2) that is contained in
the accessories box and can be mounted on the handle. It is a container for accessories, clothes
and any tools you want to carry to be used with the machine. Only original KS Group accessories are
authorized, any sharp, hot or under tension item should not be transported. The basket is designed
to withstand a maximum weight of 5 kg, it is therefore prohibited the transport of greater weight as
it may cause instability to the machine with consequent danger of crushing the user. Inside the right
side of the handle there is a clip that allows you, once the handle is pushed in, to hook it safely to the
machine (one of the two supports has a gap that allows the clip to be fixed). To put in or remove the
handle you can press the clip (Fig. 15).
MOUNTING OF THE TANKS (5, 6, Fig. 1.1)
In the packing there are two tanks: one for water and the other for detergent / water jet. They must
be placed in the compartment at the front of the machine. Once the tanks have been installed, you
can
screw
the
two
caps
placed
on
the
machine.
Содержание KGV7000
Страница 2: ......
Страница 3: ...Fig 1 1 Fig 13 Fig 1 2 Fig 2 Fig 5 Fig 3 ...
Страница 4: ...Fig Fig 4 Fig 4 1 Fig 4 2 51 51 Fig 7 Fig 8 Fig 9 ...
Страница 5: ...4 Fig 10 Fig 11 Fig 12 ...
