manualshive.com logo in svg

Krone X-Disc 620, Оригинальная инструкция по эксплуатации, Страница: 81 / 86

Поделиться
Скачать
Krone X-Disc 620 Скачать руководство пользователя страница 81

 

Before the Start of the New Season

 

81 

 

Pos: 62.4 /Überschriften/Überschriften 1/U-Z/Vor Beginn der neuen Saison @ 4\mod_1211272647559_78.docx @ 82867 @ 1 @ 1 

 

13 

Before the Start of the New Season  

Pos: 62.5 /Überschriften/Überschriften 2/P-T/Spezielle Sicherheitshinweise @ 0\mod_1196660495760_78.docx @ 9134 @ 2 @ 1 

 

13.1 

 Special Safety Instructions 

Pos: 62.6 /BA/Sicherheit/7. Gefahrenhinweise alt/Vorsätze/Gefahr Wartung allgemein Vorsätze/Feldhäcksler (Messerteller) @ 13\mod_1225453555895_78.docx @ 156385 @  @ 1 

 

 

Danger! - When performing repair, maintenance or cleaning work or when making 
technical modifications to the machine, drive elements may start moving (caution: 
cutting discs continue to run). 

Effect: Danger to life, injuries or damage to the machine. 
• 

Move the machine to the working position and lower it to the ground 

• 

Switch off the forage harvester engine and remove the ignition key. 

• 

Secure the forage harvester against accidental start-up and against rolling away. 

• 

Switch off the PTO and disengage it. 

• 

After the repair, maintenance, cleaning work or technical modifications are completed, 
mount all protective covers and protective devices properly again. 

• 

Avoid skin contact with oils, greases, cleaning agents and solvents. 

• 

In the event of injuries or burns due to oils, cleaning agents or solvents, contact a doctor 
immediately. 

• 

All other safety instructions must also be followed to avoid injuries and accidents. 

 

Pos: 62.7 /BA/Sicherheit/Vorsätze/Gefahr - Reparatur-,Wartungs- und Reinigungsarbeiten Erweiterung Messerteller @ 12\mod_1224846225151_78.docx @ 153983 @  @ 1 

 

 

Danger! - When performing repair, maintenance or cleaning work or when making 
technical modifications to the machine, drive elements may start moving (caution: 
cutting discs continue to run). 

Effect: Danger to life or serious injuries 
• 

Switch off the drive and disengage PTO. 

• 

Switch off the forage harvester engine and remove the ignition key. 

• 

Secure the forage harvester against accidental start-up and against rolling away. 

• 

When working under or with the raised machine, always secure it with suitable supporting 
elements. 

• 

Close shut-off valve on lifting cylinder of forage harvester! 

• 

After all repair, maintenance and cleaning tasks are complete, all protective covers and 
protective devices must be put in place again. 

 

Pos: 62.8 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание X-Disc 620























































































Отзывы:

Нет отзывов