manualshive.com logo in svg

Krone X-Disc 620, Оригинальная инструкция по эксплуатации, Страница: 31 / 86

Поделиться
Скачать
Krone X-Disc 620 Скачать руководство пользователя страница 31

 

Commissioning

 

31 

 

Pos: 45.1 /Überschriften/Überschriften 1/A-E/Erstinbetriebnahme @ 0\mod_1196314201498_78.docx @ 5855 @ 1 @ 1 

 

5 Commissioning 

 

Pos: 45.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Gefahr - Fehlerhafter Zusammenbau @ 1\mod_1202224212591_78.docx @ 58171 @  @ 1 

 

 

Danger! - Incorrect assembly 

Effect: Danger to life, serious injuries or serious damage to the machine. 
• 

Only authorised service centres may assemble the machine. 

• 

The machine must be assembled with special care. 

• 

Always heed the applicable accident prevention regulations. 

• 

Use only safe and sufficiently dimensioned lifting equipment and load-securing equipment. 

• 

The machine may be taken into operation only after all the safety devices have been  
installed. 

• 

If unauthorised modifications are made to the machine, the manufacturer is released from 
liability  for any resulting damage. 

 

Pos: 45.3 /BA/Erstinbetriebnahme/Vorsätze/Vor Erstinbetriebnahme prüfen und beachten X-Disc 6200 @ 140\mod_1355128682538_78.docx @ 1244161 @ 2 @ 1 

 

5.1

 

Checklist for Initial Operation

 

The following points must be checked and observed.

 

• 

Check whether the front attachment for the forage harvester has been released (observe 
the operating licence of the forage harvester). 

• 

Lubricate the front attachment thoroughly. 

• 

Check the oil level in the gearboxes. 

• 

Check the screws for firm attachment. 

• 

Check the cutter blades for damage and to make certain they are correctly seated. 

• 

Check the tension of the drive chain(s). 

• 

Completely install the protective equipments and lock them. 

• 

Adapt the adapter frame of the front attachment to the pendulum frame of the forage 
harvester. 

 

Pos: 45.4 /Überschriften/Überschriften 2/A-E/Anbau an den Feldhäcksler @ 13\mod_1225451434551_78.docx @ 156364 @ 2 @ 1 

 

5.2 

Attachment to the forage harvester 

Pos: 45.5 /BA/Inbetriebnahme/Vorsätze/Adapterrahmen/Hinweis Anbau nur für KRONE-Feldhäcksler Big X @ 12\mod_1224669316688_78.docx @ 152528 @  @ 1 

 

 

Note 

The KRONE direct cutting system X-Disc is specially designed for attachment to the KRONE 
forage harvester Big X. Attachment to other harvesters is not permitted without the consent of 
KRONE. 

 

Pos: 45.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание X-Disc 620























































































Отзывы:

Нет отзывов