manualshive.com logo in svg

Krone X-Disc 620, Оригинальная инструкция по эксплуатации, Страница: 27 / 86

Поделиться
Скачать
Krone X-Disc 620 Скачать руководство пользователя страница 27

 

Machine Description

 

27 

 

Pos: 27 /Überschriften/Überschriften 3/A-E/A/Ansprechpartner @ 0\mod_1195569394286_78.docx @ 839 @ 3 @ 1 

 

4.3.1 Contact 

 

Pos: 28 /BA/Adressen/Adresse Maschinenfabrik KRONE Spelle @ 0\mod_1195568531083_78.docx @ 734 @  @ 1 

 

 
Maschinenfabrik Bernard Krone GmbH 
Heinrich-Krone-Strasse 10 
D-48480 Spelle (Germany) 
 
Telephone: + 49 (0) 59 77/935-0 (Head Office) 
Fax.: + 49 (0) 59 77/935-339 (Head Office) 
Fax.: + 49 (0) 59 77/935-239 (Spare parts - domestic) 
Fax.: + 49 (0) 59 77/935-359 (Spare parts - export) 
Email: 

[email protected]

 

 

Pos: 30 /BA/Sicherheit/Vorsätze/Sicherheit Einführung X-Disc 6200 @ 12\mod_1224578917000_78.docx @ 151635 @ 2 @ 1 

 

4.4 Introduction 

The KRONE cutting system is equipped with all the necessary safety devices (protective 
devices). However, it is not possible to eliminate all potential hazards on this machine as this 
would impair its full functional capability. Hazard warnings are attached to the machine in the 
relevant areas to warn against any dangers. The safety instructions are provided in the form of 
so-called warning pictograms. Important information on the position of these safety signs and 
what they mean is given below! 
 

Pos: 31 /BA/Sicherheit/2. Vorangestellte Warnhinweise/Warnung - Beschädigte oder unlesbare Warnbildzeichen @ 120\mod_1343305789479_78.docx @ 1099853 @  @ 1 

 

 

WARNING! 
Danger of injury on machine parts if danger zones have not been marked when warning 
pictograms are missing, damaged or illegible. 

Danger of injury due to dangerous parts and other residual risks as users or third parties enter 
the danger area or reach into it as they are not aware of the danger. 
• 

Immediately replace damaged or illegible labels. 

• 

Following repair work, always attach appropriate adhesive safety labels to all the replaced, 
modified or repaired components. 

• 

Never clean areas carrying an adhesive safety label using a high-pressure cleaner. 

 

Familiarise yourself with the statement of the warning pictograms. The adjacent text and 
the selected location on the machine provide information on the special danger spots on 
the machine. 

 

Pos: 32 /BA/Sicherheit/6. Überarbeitete Warnhinweise/Hinweis - Nachbestellung/ Anbringung Aufkleber @ 0\mod_1195637337107_78.docx @ 1079 @ 33 @ 1 

 

4.4.1 

Re-Ordering the Adhesive Safety and Information Labels  

 

 

Note

 

Every adhesive safety and information label is assigned an order number and can be ordered 
directly from the manufacturer or from an authorized dealer (see Section "Contact"). 

 

4.4.2 

Affixing the Adhesive Safety and Information Labels  

 

 

Note - Affixing an adhesive label 

Effect: Adhesion of the label 
• 

The surface for affixing the adhesive label must be clean and free of dirt, oil and grease. 

 

Pos: 33 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание X-Disc 620























































































Отзывы:

Нет отзывов