Krone X-Disc 620 Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 86

Krone X-Disc 620 Скачать руководство пользователя страница 17

Safety

17

Pos: 17.8.38 /Überschriften/Überschriften 3/P-T/PPersönliche Schutzeinrichtung @ 187\mod_1380021186541_78.docx @ 1607134 @ 3 @ 1

3.4.11

Personal protective equipment

Pos: 17.8.39 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Persönliche Schutzeinrichtung @ 332\mod_1428385772094_78.docx @ 2536705 @ @ 1

The wearing of personal protective equipment is an important safety measure. Missing or
unsuitable personal protective equipment increases health risks and injuries.
Personal protective equipment is for example:
– Work

gloves

– Safety

boots

– Close-fitting

protective

clothing

– Hearing

protection

– Safety

glasses

•

Specify and provide personal protective equipment for the particular job.

•

Use only personal protective equipment which is in proper condition and offers effective
protection.

•

Adjust personal protective equipment to the person, for example the size.

Pos: 17.8.40 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Geeignete Kleidung tragen @ 176\mod_1373011520074_78.docx @ 1508413 @ @ 1

Wear suitable clothing

Loose clothing increases the risk of it becoming caught or wrapped around rotating parts and of
it becoming caught on protruding parts. As a result, people may be seriously injured or killed.
•

Wear tight-fitting clothing.

•

Never wear rings, chains or other items of jewellery.

•

Cover long hair with a hairnet.

•

Wear sturdy shoes or protective work boots.

Pos: 17.8.41 /Überschriften/Überschriften 3/P-T/SSicherheitskennzeichnungen an der Maschine @ 187\mod_1380021311979_78.docx @ 1607165 @ 3 @ 1

3.4.12

Safety signs on the machine

Pos: 17.8.42 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Sicherheitskennzeichnungen an der Maschine @ 176\mod_1373014574852_78.docx @ 1508510 @ @ 1

Safety stickers on the machine warn of hazards in danger areas and are an important
component of the safety equipment of the machine. Missing safety stickers increase the risk of
serious and fatal injuries.
•

Clean dirty safety stickers.

•

After cleaning, always check that safety stickers are complete and legible.

•

Immediately replace missing, damaged and unrecognisable safety stickers.

•

Provide spare parts with the designated safety stickers.

Description, explanation and order numbers of the safety stickers, see chapter Safety, "Safety
stickers on the machine".

Pos: 17.8.43 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1

«
...
15
16
17
18
19
...
»

Содержание X-Disc 620























































































Отзывы:

Нет отзывов