Krone Swadro 810, Руководство по эксплуатации, Страница: 9 / 64

I - 1
1 General Information
The operating manual contains basic instructions to be
observed when attaching, operating and doing maintance
work. Therefore it is imperative that the operating personnel
have access to and read this operating manual before
putting into operation and using the implement.
Follow both the general safety instructions contained in the
section on safety and the specific safety instructions
contained in the other sections.
1.1 Proper Use
The Swadro 881 rotary swather is used to swath cut hay.
It has a max. operating width of 8,80 m.
It is installed inside the CAT II three-point hitch at the rear.
1.2 Specifications
1.2.1 Manufacturer's Address
Maschinenfabrik Bernard Krone GmbH
Heinrich-Krone-Straße 10
D-48480 Spelle (Germany)
Telephone: (49) 0 59 77/935-0
Fax: (49) 0 59 77/935-339
E-mail: info.ldm@krone.de
1.2.2 Certification
Declaration of Conformity (requirements of the EC
Machine Directive 89/392/EEC; 3. amending directive of
22.7.93 has been fulfilled.)
See reverse side of title page
1.2.3 Identification
The machine data are listed on the identification plate (1).
Vehicle
ID no.
Type
Year
KS-0-091
M a s c h i n e n f a b r i k B e r n a r d K r o n e G m b H
Heinrich-Krone-Str. 10 D-48480 Spelle
M a d e i n
G e r m a n y
1.2.4 Data Required for Questions and
Orders
When making questions concerning the machine or
ordering replacement parts, be sure to provide type
designation, vehicle ID number and year of
manufacture.
We recommend that these details be entered in the
above boxes so that they are readily available.
Genuine replacement parts and
accessories authorized by the
manufacturer help ensure safety.
Use of other parts may void liability for
damage which results.
The entire identification plate re-
presents a legal document and should
not be altered or rendered illegible!