Krone Swadro 810, Руководство по эксплуатации, Страница: 6 / 64

2
4 Handling the swather when in use ................................................... IV -1
4.1 Mounting on the tractor ......................................................................................... IV -1
4.2 Overload protection feature ................................................................................... IV -1
4.3 Converting from transport to working position ....................................................... IV -2
4.3.1 Lowering the rotor arms – mechanically ................................................................ IV -2
4.3.2 Removing the safety mechanism for the tine tips ................................................. IV -2
4.3.3 Adjusting the rear swath cloth ............................................................................... IV -2
4.3.4 Adjusting the front swath cloth .............................................................................. IV -3
4.3.5 Folding the tine arms into working position ........................................................... IV -4
4.3.6 Moving the external guard bars into working position ........................................... IV -4
4.4 Conversion from working to transport position ...................................................... IV -5
4.4.1 Moving the external guard bars into transport position ......................................... IV -5
4.4.2 Folding the tine arms into transport position ......................................................... IV -6
4.4.3 Pushing the swath cloth into transport position ..................................................... IV -7
4.4.4 Lifting the rotor arms ............................................................................................. IV -7
4.4.5 Securing the tine tips (transport position and parked swather) ............................. IV -8
4.4.6 Driving in sloping ................................................................................................... IV -8
4.5 Removal from tractor ............................................................................................ IV -9
5 Basic setting....................................................................................... V -1
5.1 Height of the tractor lower link arms ...................................................................... V -1
5.2 Setting the working depth ....................................................................................... V -1
5.3 Setting the Operating Width Electrical .................................................................... V -2
5.4 Switching from one side swath to two individual swaths ........................................ V -3
5.5 Switching from two individual swaths to one side swath ........................................ V -3
5.6 Setting the lateral inclination of the swather disk chassis ....................................... V -4
5.7 Adjusting the Direction of Travel ............................................................................. V -4
5.8 Travel speed and drive r.p.m. ................................................................................ V -4
6 Care and maintenance ..................................................................... VI - 1
6.1 Special safety instructions .................................................................................... VI - 1
6.2 General instructions ............................................................................................. VI - 1
6.3 Tyres ................................................................................................................... VI - 2
6.3.1 Air pressure .......................................................................................................... VI - 2
6.3.2 Wheel fixings ........................................................................................................ VI - 2
6.4 Replacing the tine arms (in case of repair) .......................................................... VI - 3
6.5 Replacing the hydraulic hose lines ....................................................................... VI - 3
7 Lubrication ...................................................................................... VII - 1
7.1 Universal drive shaft ............................................................................................ VII - 1
7.2 Bearings on the swather ...................................................................................... VII - 1
7.3 Filling quantity and lubricant name for the gearbox ............................................. VII - 2
7.4 PTO Gear front and back .................................................................................... VII - 2
7.5 Lubrication chart .................................................................................................. VII - 3