Krone ADW 27 eLB9 Скачать руководство пользователя страница 75

Страница: 75 / 92

MAINTENANCE AND REPAIR

Operating instructions • Box Carrier • 505410619-02 • 05/2021

9.2.1

Regular checks and functional
testing

To ensure that the trailer is in proper oper-
ating condition, the safety-related equip-
ment must be checked regularly for proper
function, its effectiveness must be ensured
and the recurring inspections must be per-
formed.

► Prior to starting each trip, perform a

departure check

(see "4.3 Commissioning

before each trip", pg. 21)

► Perform legally prescribed general in-

spections punctually.

► Observe the intervals and instructions

for testing and maintenance of the
supplied components (e.g. axles) con-
tained within the respective supplied
operating instructions.

► Report any detected safety defects:

○

Take the trailer out of operation if oper-
ational safety is not ensured.

○

When there is a change of shift, inform
the colleague starting the next shift
about observed defects and implemen-
ted measures.

► Perform the following checks and func-

tional testing at the intervals pre-
scribed:

Daily, or before every journey

Component

Inspection

Rear underrun pro-
tection/side collision
protection

► Visually inspect

for wear, dam-
age and proper
attachment.

Compressed air tank

► Actuate the wa-

ter drain valve

(see "5.8 Draining
the compressed
air tanks", pg. 36)

Component

Inspection

Lighting equipment

► Visually inspect

to make sure it
is working prop-
erly.

Hydraulic rear width
expansion (optional)

► Visually inspect

for wear, dam-
age, leakage
and proper at-
tachment, per-
form a func-
tional test on the
pump.

Coupling ring

► Visual check for

wear, damage
and proper at-
tachment.

Draw fork

► Visual check for

wear, damage
and proper at-
tachment.

► Lubricate the

spring bolt on
the base shoe.

Drawbar wale

► Visual check for

wear, damage
and proper at-
tachment.

Weekly

Component

Inspection

Compressed air tank

► Perform a visual

inspection for
wear and dam-
age.

Tyres

► Check the tread

depth and tyre
pressure

► Go to an authorised specialist work-

shop if defects have been found.

Содержание ADW 27 eLB9





























































































Результаты поиска

Содержание ADW 27 eLB9

Отзывы:

Бренды по названию

Популярные бренды

Krone ADW 27 eLB9, Руководство по эксплуатации

Результаты поиска

Содержание ADW 27 eLB9

Отзывы:

Бренды по названию

Популярные бренды