manualshive.com logo in svg

Krone ADW 27 eLB9, Руководство по эксплуатации

Поделиться
Скачать
Krone ADW 27 eLB9 Скачать руководство пользователя страница 59

ROAD OPERATIONS

Operating instructions • Box Carrier • 505410619-02 • 05/2021

59

515040284-01

Senken / Stopp / Heben

Lower  / Stop / Raise

Abgesenkt

Lowered

Fahrt

Drive

515040284-01

Senken / Stopp / Heben

Lower  / Stop / Raise

Abgesenkt

Lowered

Fahrt

Drive

500626977-01

P

P

1

2

Fig. 6-3:

Control unit for brake system of
turnframe trailer

1

Red control knob for the parking brake

2

Black control knob for the service
brake

þ

The trailer's compressed air supply is
not connected.

► Press in the black control knob for the

service brake.

► Press in the red control knob for the

parking brake 

(see "5.9.2 Parking brake",

pg. 38)

.

► The trailer brake is released.

ü

The trailer can be manoeuvred.

► Pull out the black control knob for the

service brake again after manoeuvring.

► Pull out the red control knob for the

parking brake.

ü

The trailer brake is engaged.

6.3 

Parking the trailer safely

!

 WARNING

Risk of accident due to instability and
rolling away!

Unintentional trailer movements can
cause serious injury and property dam-
age.

► Park the trailer on a solid surface to

avoid sinking in or tipping.

► Align the tractor unit and trailer behind

each other in a straight line.

► Secure the trailer against rolling away

by applying the parking brake.

► Use the wheel chocks to prevent the

trailer from rolling away.

► Load and unload the trailer such that

traffic hazards are ruled out.

► Be mindful of the trailer's stability

when loading and unloading while un-
hitched. If necessary, use additional
supports.

INFO

Ramp adjustments can only be made in
the coupled (saddled) condition, with ad-
ded compressed air. If rear braces have
been factory-fitted to the rear of the trailer,
adjust these according to the height of the
ramp.

► Drive the trailer onto firm and level

ground. 

► Apply the parking brake 

(see "5.9.2

Parking brake", pg. 38)

.

► Use wheel chocks to prevent the trailer

from rolling away 

(see "5.1 Using wheel

chocks", pg. 23)

.

► Extend the landing leg winches 

(see

"5.2 Landing leg winches", pg. 24)

.

► Extend the rear braces, if present 

(see

"5.3 Rear braces", pg. 26)

.

► Disconnect the supply and control con-

nections 

(see "5.6 Supply and control con-

nections", pg. 32)

.

► Unhitch the trailer from the tractor unit.

Содержание ADW 27 eLB9





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды