manualshive.com logo in svg

Krone ADW 27 eLB9, Руководство по эксплуатации

Поделиться
Скачать
Krone ADW 27 eLB9 Скачать руководство пользователя страница 35

RUNNING GEAR OPERATION

Operating instructions • Box Carrier • 505410619-02 • 05/2021

35

► Check the cleanliness and integrity of

the sealing surfaces on the coupling
heads. Clean if necessary.

► Always connect the brake compressed

air coupling first.

► Connect the supply compressed air

coupling.

► Connect the power supply (vehicle

lighting) and the brake power supply
(EBS).

ü

The supply and control connections
are now connected.

Disconnecting C-coupling heads

þ

The parking brake on the tractor unit is
applied.

þ

The parking brake on the trailer is ap-
plied 

(see "5.9.2 Parking brake", pg. 38)

.

► Always disconnect the supply com-

pressed air coupling first.

► Disconnect the brake compressed air

coupling.

► Disconnect the power supply (vehicle

lighting) and the brake power supply
(EBS).

ü

The supply and control connections
are disconnected.

5.7 

Blind couplings

NOTE

Sagging supply and control connec-
tions can cause material damage!

Sagging supply and control connections
can become contaminated on unhitched
trailers,thereby causing material damage.

► On unhitched trailers, always plug the

lines and plugs of all supply and con-
trol connections into their designated
blind couplings.

3

1

2

6

4

5

Fig. 5-17:

Possible arrangement of the sup-
ply and control connections on a
blind coupling

1

EBS plug

2

Plug (white), 7-pin

3

Plug, 15-pin

4

Brake coupling

5

Plug (black), 7-pin

6

Compressed air supply coupling

► Close the coupling heads.

► Place the supply and control connec-

tions on the brackets.

► Insert the cable plugs into their desig-

nated blind plugs.

ü

The supply and control connections
are secured.

Содержание ADW 27 eLB9





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды