manualshive.com logo in svg

Krone ADW 27 eLB9, Руководство по эксплуатации

Поделиться
Скачать
Krone ADW 27 eLB9 Скачать руководство пользователя страница 42

RUNNING GEAR OPERATION

42

Operating instructions • Box Carrier • 505410619-02 • 05/2021

5.9.4 

Brake release function

 CAUTION

Risk of injury due to crushing!

When lowering the trailer, the clearance
under the trailer is reduced. Persons
between the road and vehicle parts can be
crushed and seriously injured.

► Avoid the danger areas.

► When operating the air suspension,

avoid having persons underneath the
trailer.

As an option, KRONE trailers can be
equipped with a brake release function. It
enable safe lifting and lowering of the
braked vehicle by preventing tension in the
chassis. Tension occurs by lifting and
lowering when the service brake is applied.
When the brake is subsequently released,
there can be uncontrolled jerky vehicle
movements.

Actuating the brake release function

þ

The 

(see "5.9.2 parking brake", pg. 38)

 is

applied on the tractor unit.

þ

The service brake on the trailer is ven-
ted and braked with a pressure of at
least 6.5 bar.

515040284-01

Senken / Stopp / Heben

Lower  / Stop / Raise

Abgesenkt

Lowered

Fahrt

Drive

515040284-01

Senken / Stopp / Heben

Lower  / Stop / Raise

Abgesenkt

Lowered

Fahrt

Drive

500626977-01

P

P

1

Fig. 5-26:

Control unit for Load Carrier turn-
frame version (3-axle)

1

Control knob for the brake release
function

► Actuate and hold the control knob

(rotary push-button switch with reset),
and at the same time, left/lower the
trailer with the air suspension.

ü

The brake release function is aborted
at speeds above 1.8 km/h.

ü

The pressure on the yellow coupling
head must be greater than 6.5 bar.
The brake release function is aborted
when this value is not reached.

Fig. 5-27:

Brake release function operating
sign

5.10 

Air suspension

!

 WARNING

Risk of accident due to fully lowered or
raised vehicle!

Failure to set the air suspension to the
"Drive" position before starting off can res-
ult in a risk of accidents due to impaired
driving characteristics or vehicle collisions
in passageways.

► Always move the air suspension into

driving position before driving off. The
only exception is manoeuvring at
walking speed.

Содержание ADW 27 eLB9





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды