Krone ADW 27 eLB9 Скачать руководство пользователя страница 74

Страница: 74 / 92

MAINTENANCE AND REPAIR

Operating instructions • Box Carrier • 505410619-02 • 05/2021

NOTE

Environmental damage caused by
chemicals!

Along with dirt, lubricants and cleaning
agents can also end up in the waste water
and endanger the environment when you
wash your vehicle.

► Do not allow lubricants or other clean-

ing chemicals to escape into drains,
sewers or to seep into the ground.

► Only clean in suitable washing areas

with an oil separator.

► Observe the applicable national envir-

onmental protection measures.

Cleaning the trailer

► Park the trailer on a level and firm sur-

face.

► Apply the parking brake

(see "5.9.2

Parking brake", pg. 38)

► Secure the trailer with wheel chocks

(see "5.1 Using wheel chocks", pg. 23)

► Clean the trailer with lots of water and

an acid-free and pH-neutral cleaning
agent.

► Maintain a spraying distance of ap-

prox. 30 cm when using high-pressure
cleaners.

► Allow the trailer to dry.

The trailer is cleaned.

► Carry out a departure check

(see "4.3

Commissioning before each trip", pg. 21)

9.2

Maintenance

WARNING

Risk of accident and property damage
caused by improperly performed or
lack of maintenance!

Improperly performed or lack of mainten-
ance work and incorrect replacement
parts affect safety.

► Observe the national accident preven-

tion regulations.

► Only have necessary maintenance

work performed by an authorised spe-
cialist workshop.

► Only use original spare parts.

► Observe the maintenance instructions

of the installed supplied components.

WARNING

Risk of accident due to instability and
rolling away!

Unintentional trailer movements can
cause serious injury and property dam-
age.

► Secure the trailer against rolling away

by applying the parking brake.

► Use the wheel chocks to prevent the

trailer from rolling away.

► Park the trailer on a solid surface to

avoid sinking in or tipping.

► Ensure stability when the trailer is un-

hitched. If necessary, use additional
supports.

The aim of maintenance is:

○

that the commissioned trailer is kept
operating safely and performing prop-
erly during use,

○

to prevent downtimes,

○

to keep the costs of operational readi-
ness reasonable and financially justifi-
able,

○

and to limit unavoidable repair ex-
penditures.

Содержание ADW 27 eLB9





























































































Результаты поиска

Содержание ADW 27 eLB9

Отзывы:

Бренды по названию

Популярные бренды

Krone ADW 27 eLB9, Руководство по эксплуатации

Результаты поиска

Содержание ADW 27 eLB9

Отзывы:

Бренды по названию

Популярные бренды