manualshive.com logo in svg

Krone ADW 27 eLB9, Руководство по эксплуатации

Поделиться
Скачать
Krone ADW 27 eLB9 Скачать руководство пользователя страница 67

LOADING AND SECURING

Operating instructions • Box Carrier • 505410619-02 • 05/2021

67

Operating the height adjustment

1

2

Fig. 7-8:

Height-adjustable lock

1

Bolt

2

Lock

► Slide the lock upwards and then to the

side.

► Turn the lever.

ð

The height adjustment is un-
locked.

► Slide up the height adjustment with the

lock mechanism.

► Turn back the lever.

ü

The height adjustment has been read-
justed and locked.

7.6 

Putting on the swap body

!

 WARNING

Risk of accident caused by incorrectly
stacking the swap body!

If stacked incorrectly, the swap body could
fall over and cause serious personal injury
or material damage.

► While stacking the swap body, secure

the carrier vehicle against rolling
away.

► Ensure that no persons are in the

danger zone when stacking the swap
body.

!

 WARNING

Risk of accident caused by incorrectly
locking and securing the swap bodies!

While driving, swap bodies that have been
inadequately locked and secured can tip
off their carrier vehicles, causing fatal in-
juries to other road users.

► Do not exceed the legally permitted

heights.

► Before each trip, after stacking the

swap body, check that all locks and
retainers are properly secured. In-
formation concerning operating the
locking mechanisms can be found in
the operating instructions for the car-
rier vehicle.

!

 WARNING

Risk of accidents from locking and se-
curing the landing legs incorrectly!

While driving, improperly locked and se-
cured landing legs can slide out of their re-
tainer guides, endangering other road
users, possibly causing serious injuries,
including death.

► Before every trip, ensure that all land-

ing legs are properly locked in place
and doubly secured.

NOTE

Material damage by manoeuvring with
folded out landing legs!

When manoeuvring with folded out land-
ing legs, the landing legs could hit the
ground or obstacles and thereby damage
the swap body and the carrier vehicle.

► Fold in the landing legs on the swap

body before manoeuvring.

þ

The swap body is standing on the
landing legs. If applicable, lift the swap
body from the ground and fold out the
landing legs.

► Depending on the load condition,

move the stop 

(see "7.3 Operating the

stop", pg. 64)

.

► Open the lock 

(see "" pg. 66)

.

Содержание ADW 27 eLB9





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды