KREMLIN REXSON
Page 23
Manual : 573.191.112
10. PRODUCTION (F1)
When passing for the first time to production, the machine carries out a regeneration :
The display unit consists of a countdown that enables to know, in percentage (9
J
between 90% and 100%
of the volume), the pending volume flow according to the P3 parameter. At the end of that stage, the
machine enters in production. You can also activate ESC during the fluid priming; we advice you not to start
painting immediately.
In production, as well as in regeneration, the machine injects little volumes of catalyst in a base constant
flow. At the end of each injection, the machine checks the mixing and re-adjusts the volumes of injections
considering the mixing difference.
In production, there are 3 main cases :
- the operator is spraying and the Cyclomix operates correctly. The real mixing ratio is displayed on the
screen.
-
the machine stops because of a dysfunction. The kind of breakdown is displayed on the screen, the
machine emits a sound signal to inform the operator la machine (cf § "TROUBLESHOOTINGS") .
-
The machine has reached the maximum life duration of the material and passes automatically in
regeneration mode. The machine emits a sound signal to inform the operator. The following screen is
displayed :
Open the gun until the regeneration ends.
To exit from production : activate ESC. The following screen is displayed :
In the 3 shades' version, during the color change, the potlife is updated with the new parameters of the selected
color. If you validate another color, the potlife in progress with the old color will remain until a flushing or a
regeneration is carried out.
If the machine is not in mixed material, a regeneration is automatically carried out to
bring the mixed material to the gun.
We advice you to shut off air during that stage.
You can stop the regeneration activating ESC. Then, the regeneration stops, but
careful, the quality of the product can be inferior.
Program
Real mixing ratio
Potlife (9-0)
