6.3 Installing the mini spray gun
Changing the installation position of the mini spray gun
The mini spray gun can be mounted on one side on the retaining bolts in order to change the
installation position.
Fig. 2: Installing the mini spray gun
1.
Position the enclosed retaining bolt ( Fig. 2/3) with the flattened end along the mini spray
gun ( Fig. 2/1) and fixate through the opening ( Fig. 2/2) with suitable screws.
2.
Ensure proper earth connection of the mini spray gun.
6.4 Connecting mini spray gun
WARNING!
Danger of injury due to improper connection!
When the material supply is pressurised, e.g. from pressure containers or with pumps, the
range of the material jet can increase by a multiple in case of atomizer air failure. This
presents a hazard to people and property.
–
Make sure that the material supply is interrupted if the atomizer air pressure drops off
quickly.
–
It is recommended to regulate the atomizer air pressure via a filter pressure reducer.
Mini spray gun MA-1
ENGLISH
■
200-0345
GB–19
