Outdoor operation and operation in exterior areas!
Use suitable measures to protect the device during the operation from environmental impacts
in an exterior area through:
–
Moisture
–
UV radiation
–
Frost, etc.
3.6 Residual risks
Devices, machines or systems made by Krautzberger GmbH have been manufactured based on
state-of-the-art technology and in compliance with technical safety regulations.
Nonetheless, their use may pose a threat to the life or health of users or third parties, or harm the
device, the machine, the system or other material assets.
n
Mechanical hazards (crushing, shearing, cutting, jamming, burning, etc.) are possible at any
time during the installation, during operation as well as during maintenance work and serv-
icing.
3.7 Course of action in an emergency
In principle, the applicable national, regional and internal company regulations concerning the
course of action in case of an emergency must be adhered to and if necessary respective
safety measures must be taken on the system owner's side.
Operating instructions
T-Dok-015-GB-Rev.0
[email protected], www.krautzberger.com
GB–14
