Krautzberger 1050-090-1127, Руководство по эксплуатации

Страница: 34 / 45

9 Troubleshooting
Personnel:
n Qualified personnel
If the fault is not included in the following table or if it cannot be eliminated with the measures
described, contact Customer Care.
Spray pattern Error Cause Remedy
Normal spray pattern
Spray pattern too
heavy towards the top
and towards the
bottom n Dirty air nozzle
n Dirty material
nozzle
Clean nozzles (
Ä
Chapter 8.3
‘Cleaning’ on page 28 )
Spray pattern concen-
trated on the left or
right side n Dirty air nozzle
n Dirty material
nozzle
Clean nozzles (
Ä
Chapter 8.3
‘Cleaning’ on page 28 )
Heavy application in
the centre of the spray
pattern n Too much mate-
rial n Reduce material
supply
n Material too thick n Thin material
Split spray pattern n Insufficient mate-
rial n Increase material
supply
n Flat jet air pres-
sure too high n Reduce flat jet air
pressure
Spray pattern too thin n Cap nut loose Tighten cap nut
Operating instructions
T-Dok-015-GB-Rev.0
mail@krautzberger.com, www.krautzberger.com GB–34