n
Change the atomiser air pressure.
n
Change the pressure of the spray medium.
n
Select another nozzle size.
Too-high air pressure causes unnecessarily high air consumption and too-strong atomisation
of the spray medium. It is recommended that you first adjust the spray pattern by varying the
air and spray medium pressure. If you cannot achieve satisfactory results this way, you should
experiment with other nozzle sizes.
7.6 Adjusting the needle stroke
Needle stroke adjustment options
Depending on the optional design of the mini spray gun there are two options for the needle
stroke adjustment.
Fig. 6: Adjusting the needle stroke
1
Set the needle stroke and then tighten the nut to prevent an accidental change of the needle
stroke
2
Set the needle stroke with a knurl nut
Operating instructions
T-Dok-015-GB-Rev.0
[email protected], www.krautzberger.com
GB–26
