43
INTERMEDIATE PIECES
The
FA 60 219 00
end piece fixes to steel box section roofs. Once you have
determined the location of the end anchorage point, position the end piece
such that the 4 holes at each corner of the plate match the top of the corru
-
gations. Drill 4 holes at each corner so that the plate can be secured in place
with 16 rivets. Insert the double-sided adhesive EPDM gasket between the
roof and the plate and fix in place with 16 rivets. Cover the rivets with
weatherproof adhesive tape.
Proceed in the same way when installing the FA 60 220 00 and FA 60 221
00 intermediate posts.
FA 60 219 00
The
FA 60 222 00
end piece fixes to raised seam roofs. The fixing flanges
can be positioned over various plate holes so that different receiving struc
-
ture dimensions can be accommodated.
Once you have determined the location of the end anchorage point, secure
the fixing flanges to the receiving structure using ordinary and Allen socket
grub screws and thread lock (tightening torque 29 Nm).
Next, secure the plate to the fixing flanges using assembly screws.
Proceed in the same way when installing the FA 60 223 00 and FA 60 224
00 intermediate posts.
FA 60 222 00
The
FA 60 204 00
intermediate piece can be ground, wall or ceiling mount-
ed. Once you are satisfied with the component’s orientation, secure it to
its mount.
It
can be assembled:
On FA 60 211 30 and FA 60 211 50 posts using the M12 x 25 mm hex head
bolt and M12 washer (provided with the posts). Apply some thread lock
and screw directly into the threaded hole in the post head.
Into the FA 60 208 00 clamped plates using the M12 x 30 mm hex head bolt
and M12 washer (provided with the fixing plates).
Into the FA 60 213 00 clamping plates using the M12 x 30 mm hex head
bolt and M12 washer (provided with the fixing plates).
Into the FA 60 220 00 steel box section intermediate posts and FA 60 223
00 standing seam roof using the M12 x 25 mm hex head bolt and M12
washers (provided with the intermediate components).
FA 60 204 00
