KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-81SID Remotely
20
8
Operating the VP-81SID Remotely
The
VP-81SID
can be operated remotely via any of the following methods:
•
The Step-in Controller software (see
Section 8.1
)
•
Step-In Commander panels
•
Contact closure switches (for connecting, see
Section 6.2
)
•
RS-485 (for connecting, see
Section 6.4
) or RS-232 (for connecting, see
Section 6.3
) serial commands transmitted by a touch screen system, PC or
other serial controller
•
Ethernet over a LAN (for connecting, see
Section 6.5
)
•
Remotely using the Kramer
RC-IR3
Infrared Remote Control Transmitter
(refer to the
RC-IR3
user manual) or the infrared remote extension cable
transmitter
•
The embedded Web pages (see
Section 9
)
8.1 VP-81SID Step-In Controller Software
The Step-In Software requires the following:
•
Windows™ XP, Vista or Windows™ 7
•
Microsoft .Net Framework version 3
To install the Step-In Software, download the software and run the setup file. After
installation, running the Step-In Software for the first time displays a window
similar to that shown in
Figure 10
.
The
VP-81SID
can operate in either the secure mode or the unsecure mode. The
factory default mode is unsecure. To change the mode, see
Section 14.12.33
. In the
secure mode, access can be via either Admin or User (see
Section 8.1.1
). When in
unsecure mode, full access is granted without Admin authorization.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203