KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VP-81SID Remotely
24
8.1.4 Connecting to the Device
To connect to the device:
1. Click the
Connect
button.
The
Connection Method
window is displayed as shown in
Figure 13
.
Figure 13: Connection Method Window
2. Select the connection method (via Ethernet over a LAN or a serial connection)
by clicking the relevant radio button.
3. For Ethernet, enter the IP address and Port number of the device and click
Connect
.
To set the default IP address and Port number, press the
Default
button.
4. For a serial connection, select the required Com port from the drop-down list.
5. Click
Connect
.
If the connection is successful, the window shown in
Figure 10
appears. If the
connection is not successful, a Timeout error message appears.
8.1.5 Switching an Input to an Output
To switch an input to an output:
1. Click on the required twisted-pair or local input to switch.
The input is selected and the button changes to solid purple as shown in
Figure 17
.
Figure 14: Input Selection
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203
