Overview
3
3
3
Overview
The
VP-81SID
can route one of eight TP (Twisted Pair), a DVI or an HDMI input
to either a TP or an HDMI output. Input selection can also be controlled remotely;
•
Using Step-In modules (for example, the
SID-DP
)
•
Contact closure switches
•
A serial controller via RS-232 or RS-485
•
A PC via Ethernet connected over a LAN
The device also outputs balanced and unbalanced stereo audio, as well as digital
audio.
In particular, the
VP-81SID
:
•
Has a bandwidth of 1.65Gbps per video channel
•
Can be cascaded with up to four
VP-81SID
devices via the HDMI port to
provide up to 37 Twisted Pair inputs
•
Supports the SID range of Step-in Commander panels for remote inputs and
remote step-in control
•
Has a USB power port that can provide power to USB devices, (for
example, the Kramer
KW-11T
)
•
Is HDCP compliant
•
Provides EDID capture – Copies and stores the EDID from a display device
You can control the
VP-81SID
using the front panel buttons, or remotely via:
•
RS-485 or RS-232 serial commands transmitted by a touch screen system,
PC or other serial controller
•
Ethernet over a LAN
•
The Kramer
RC-IR3
Infrared Remote Control Transmitter or the
C-A35M/IRR-50 infrared remote extension cable transmitter (optional)
To achieve the best performance:
•
Connect only good quality connection cables, thus avoiding interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables)
•
Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your
VP-81SID
away from
moisture, excessive sunlight and dust
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203