Kramer VP-773, Руководство пользователя

Страница: 75 / 80

70 VP-773 - The VP-773 RS-232 Communication Protocol
12.4 The Protocol 3000 Common Operation Commands
The following table lists the protocol 3000 commands:
Operation commands
Command Syntax Response
Lock front panel
LOCK-FP LOCK-MODE LOCK-FP LOCK-MODE
RESULT
Get front panel
locking state LOCK-FP?
LOCK-FP LOCK-MODE
Parameters Description:
LOCK-MODE = Front panel locking state:
"0" or "off" to unlock front panel buttons.
"1" or "on" to lock front panel buttons.
Power state
POWER POWER-MODE POWER POWER-MODE
RESULT
Get power state POWER?
POWER POWER-MODE
Parameters Description:
POWER-MODE = power state:
"0" or "off" to enter standby mode.
"1" or "on" to power up.
Restart device RESET RESET OK
Peripheral firmware
update execute* UPGRADE UPGRADE OK
Usually the firmware will upload to the device via a command such as LDFW
A device reset may be needed to complete the process
Video core Firmware
update execute* UPGRADES UPGRADES OK
Reset configuration
to factory default FACTORY
FACTORY RESULT
SET dedicated EAS
port settings
EAS-CFG PORTTYPE ,
PORTNUM
EAS-CFG PORTTYPE ,
PORTNUM RESULT
GET dedicated EAS
port settings EAS-CFG?
EAS-CFG PORTTYPE ,
PORTNUM
Parameters Description:
PORTTYPE
either “TCP” or “UDP”
PORTNUM Ethernet port
EAS Activation Mode
notification
messages N/A
EAS-EXE ACTIVATION-MODE OK
Parameters Description:
ACTIVATION-MODE = EAS notification:
“1” to notify full siren activation mode (Severity = Extreme)
“2” to notify full screen activation mode (Severity = Severe)
“3” to notify crawler activation mode (Severity = Moderate \ Minor \ Unknown)
“0” to notify that the alert went off either by timeout or by keystroke
SET dedicated port
tunneling settings
PTNL-CFG PORTTYPE ,
PORTNUM
PTNL-CFG CFG PORTTYPE ,
PORTNUM RESULT