![background image](http://html1.mh-extra.com/html/kramer/vp-773/vp-773_user-manual_2002260062.webp)
VP-773 - Technical Specifications
57
57
11.1
Default Communication Parameters
RS-232
Protocol
3000 (Default)
Legacy
Baud Rate:
115,200
9,600
Data Bits:
8
8
Stop Bits:
1
1
Parity:
None
None
Command Format:
ASCII
ASCII
Example (Set display mode to Picture in Picture):
#Y 0,110,1<CR>
>Y 0 110 1<CR>
Ethernet
To reset the IP settings to the factory reset values, power cycle the device while holding in the
Ethernet Reset button, located on the rear panel of the unit
IP Address:
192.168.1.39
Subnet mask:
255.255.000.000
Default gateway:
000.000.000.000
TCP Port #:
5000
UDP Port #:
50000
Maximum UDP Ports: 10
Maximum TCP Ports: 4
Full Factory Reset
Front panel buttons
Turn power off. Turn power on again while holding the RESET TO
XGA/720p front panel button. The LEDs blink. Full factory reset is
complete once the LEDs cease to blink and react normally
OSD
Factory Reset through the Misc menu item
Protocol 3000
Use “Factory” command or #Y 0,770,1<CR>
11.2
Input Resolutions
This section defines the input resolutions for each input
11.2.1
HDMI Input Resolutions
HDMI Input Resolutions
NTSC
1080_I60
640x480_72
1024x768_70
1360x768_60
PAL
1080_P23_976 640x480_75
1024x768_75
1366x768_60
525_P60
1080_P24
640x480_85
1024x768_85
1440x900_60
625_P50
1080_P25
800x600_56
1152x864_75
1400x1050_60
720_P24
1080_P30
800x600_60
1280x800_60
1400x1050_75
720_P25
1080_P50
800x600_72
1280x960_85
1600x900_60
720_P30
1080_P60
800x600_75
1280x768_60
1600x1200_60
720_P50
2K50
800x600_85
1280x1024_60
1680x1050_60
720_P60
2K60
848x480_60
1280x1024_75
1920x1200_60RB
1080_I50
640X480_60
1024x768_60
1280x1024_85
Содержание VP-773
