VP-733
–
Presentation Switcher / Scaler Buttons
21
6.3.1
Activating the PIP Feature
Activate the PIP feature in any of the following ways:
•
Press the PREVIEW MODE front panel button until it no longer illuminates
and then select the PIP input by pressing a PIP/PREVIEW input button
•
Press the PREV key on the IR remote control transmitter (see
Section 6.5
and then select the PIP input by pressing a PIP/Preview Source input button -
check
•
Access the OSD PIP menu (see
) and select PIP On
6.3.2
Selecting the PIP Source
To easily select the PIP source, press a PREVIEW INPUT front panel button.
For example, to select DP 2 as the graphic PIP source over an HDMI background,
make sure that the PREVIEW MODE button is not illuminated and press the DP 2
PIP/PREVIEW front panel button.
To select the PIP source using the IR remote controller, press the desired PIP
source on the remote controller.
For example, if you want to select HDMI 2 as the PIP source, press the HDMI 2
button in the PIP/Preview Source area on the IR remote controller.
To set the PIP source via the OSD menu, do the following:
1. Press the MENU button to enter the OSD menu.
2. Press the
button to move to the PIP icon (see
3. Select On/Off and set the PIP to ON.
4. Select Source and press ENTER.
5. Use the
or
buttons to select the PIP Source from the drop-down list
box, and press ENTER.