VP-733
–
Connecting the VP-733
15
5.4.1
Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the
VP-733
directly to the Ethernet port on
your PC using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the
VP-733
with the factory configured default IP address.
After connecting the
VP-733
to the Ethernet port, configure your PC as follows:
1. Click
Start
>
Control Panel
>
Network and Sharing Center
.
2. Click
Change Adapter Settings
.
3. Highlight the network adapter you want to use to connect to the device and
click
Change settings of this connection
.
The Local Area Connection Properties window for the selected network
adapter appears as shown in
Figure 7: Local Area Connection Properties Window