Kramer VP-733, Руководство пользователя

Страница: 19 / 116

VP-733
–
Connecting the VP-733 11
5 Connecting the VP-733
Always switch off the power to each device before connecting it to your
VP-733 . After connecting your VP-733 , connect its power and then
switch on the power to each device.
To connect the VP-733 as illustrated in the example in Figure 3 , do the following:
1. Connect the video sources:
▪
A CV or YC video source (for example, a DVD Player) to the UNIV IN 1
15-pin HD connector
▪
A component video source (for example, a DVD player) to the UNIV IN
2 15-pin HD connector
Note that the UNIV IN 15-pin HD connector pinout is defined in Section
5.1 ).
▪
An HDMI source (for example, a Blu-ray player) to the HDMI IN 1
connector
▪
An HDMI source (for example, a Blu-ray player) to the HDMI IN 3
connector
Alternatively, you can connect the DVI connector on the DVD player to
the HDMI connector on the
VP-733 via a DVI-HDMI adapter.
▪
A DisplayPort video source (for example, a notebook) to the DP IN 1
connector
▪
An HDBT transmitter (for example, TP-580Txr ) to the HDBT IN 2
RJ-45 connector
Although this connecting example shows only several inputs that are
connected, you can connect all the inputs simultaneously.
2. Connect audio sources to the analog stereo audio inputs (from 1 to 10), not
shown in Figure 3 .