Kramer VIA GO2 Скачать руководство пользователя страница 78

Страница: 78 / 86

Kramer Electronics Ltd.

VIA GO²

– For User: Participating in a VIA Meeting

Mirroring an App from Your Device

VIA GO²

enables you to mirror only one app that is open on your device. The rest of the

content on your screen is not mirrored.

Audio is currently not supported for this feature.

To mirror only one app from your device:

1. On the

VIA

app dashboard, click

Share App

The Choose window appears.

2. Select the application window to share and click

Share

Only the selected app is shared on the VIA main display.

To stop mirroring the app, on

Kramer VIA

app, click

Stop Presenting

Mirroring Apple Laptops and iPhones Using iOS/OS X Airplay
Service

All participants in a meeting using an Apple device can mirror their screen on the main display
using the Apple AirPlay service. No application is required to activate this mode. However, an
administrator must enable the iOS mirroring feature in the

VIA GO²

Gateway Management

pages (see

Presentation

on page

Minimum requirements for mirroring using Airplay services are:

•

iPhone or iPad/Mini iPad

– Minimum version iOS 10 (iOS 12 or higher is recommended).

•

Mac Books and Apple Computers

– Minimum version OS X 10.11 (Mojave or higher is

recommended).

AirPlay discovery relies on Bonjour (mDNS). For more information see VIA IT
Deployment Guide, available for download at:

www.kramerav.com/downloads/VIA GO²

To mirror your screen using AirPlay Services:

1. Connect your Apple device to the network that

VIA GO²

is connected to.

2. For iPhone or iPad/Mini iPad: Swipe from the upper right corner to reveal the Control

Center and click

Screen Mirroring

For Mac Books and Apple Computers: Click the AirPlay icon on the Apple Menu Bar,
located in the top right corner of the screen, near the clock.

The Screen Mirroring list appears.

3. Select

VIA GO²

’s AirPlay device name (default =

VIA_AirMirror_XXXX

, where XXXX is

a random combination of letters and numbers).
If the room code is enabled, a message appears asking you to enter the code.

4. Type the code that appears on the

VIA GO²

main display (if activated).

Mirroring starts, and your screen appears on the main display.

Содержание VIA GO2























































































Результаты поиска

Содержание VIA GO2

Отзывы:

Похожие инструкции для VIA GO2

Бренды по названию

Популярные бренды

Kramer VIA GO2, Руководство пользователя

Результаты поиска

Содержание VIA GO2

Отзывы:

Похожие инструкции для VIA GO2

Бренды по названию

Популярные бренды