Kramer KIT-400, Руководство пользователя

Страница: 57 / 96

Kramer Electronics Ltd.
KIT-400
– Using Embedded Webpages
55
6. In the Properties (Frame) area, perform any of the following actions:
▪
Click to copy the selected frame properties (Fill, Border Color, Border Width and
Border Radius).
▪
Click to paste frame properties to a selected frame.
▪
Change the frame Name.
▪
Set the position of the frame by moving it (or by entering the x, y coordinates).
▪
Enter frame size (or click Size up/down arrows to change h and w frame size).
▪
Click the Fill color button to change the frame color.
▪
Click the Border Color button to change the border color.
▪
Enter Border Width to change the border width (or use up/down arrows).
▪
Enter Border Radius to change the border edge radius (or use up/down arrows).
▪
Click Show / Hide to show or hide the frame.
7. Click Save Changes .
The frame is configured.
Adding a New Button
The buttons in the device control panel are designed to carry out an assigned script to run
when that button is pressed.
To add a new button:
1. In the Navigation pane, click Automation . The Automation page appears (see
Figure 29 ).
2. Click the Panel tab. The default KIT-400 Device Control Panel appears (see Figure 31 ).
3. Click EDIT . The Edit panel appears (see Figure 32 ).