Kramer KIT-400, Руководство пользователя

Страница: 19 / 96

Kramer Electronics Ltd.
KIT-400
– Operating and Controlling KIT-400
17
The default OSD timeout is set to 10 seconds.
Use the OSD menu to perform the following operations:
•
Adjusting Image Parameters on page 17 .
•
Selecting an Input Signal on page 18 .
•
Setting Output Parameters on page 18 .
•
Setting Audio Parameters on page 19 .
•
Setting OSD Parameters on page 19 .
•
Setting HDCP on page 20 .
•
Setting Sleep Mode on page 20 .
•
Setting Switching Mode on page 21 .
•
Setting FREEZE Button Functionality on page 21 .
•
Managing EDID via OSD on page 21 .
•
Defining the TOGGLE PIN on KIT-400R on page 22 .
•
Manually Switching Relay on page 23 .
•
Defining CEC on page 23 .
•
Defining Power-up State on page 24 .
•
Viewing Device Information on page 24 .
•
Performing a Reset on page 24 .
Adjusting Image Parameters
KIT-400R
enables adjusting the image parameters such as contrast, brightness and so on.
To adjust the image parameters:
1. On the front panel press MENU . The menu appears.
2. Click Picture and define the image parameters according to the information in the
following table:
Menu Item Function
Contrast Set the contrast.
Brightness Set the brightness.
Finetune Video HUE
– set the color hue.
SATURATION
– set the color saturation.
SHARPNESS
– set the sharpness of the picture.
NR (Noise Reduction)
– select the noise reduction filter: Off
(default), Low, Middle or High.
Color Set the Red, Green and Blue shades.
Image parameters are adjusted.