Kramer KIT-400, Руководство пользователя

Страница: 92 / 96

Kramer Electronics Ltd.
KIT-400
– Protocol 3000
90
Function Description Syntax Parameters/Attributes Example
VMUTE
Set enable/disable
video on output.
Video mute
parameter 2 (blank
picture) is not
supported.
COMMAND
#VMUTE

out_index , flag <CR>
FEEDBACK
~nn@VMUTE

out_index , flag <CR><LF>
out_index
– Number that
indicates the specific output: 1
flag
– Video Mute
0
– Video d5V low
1
– Video e5V high
2
– Blank p 5V high
Disable the video output:
#VMUTE

1 , 0 <CR>
VMUTE?
Get video on output
status.
Video mute
parameter 2 (blank
picture) is not
supported.
COMMAND
#VMUTE?

out_index <CR>
FEEDBACK
~nn@VMUTE

out_index , flag <CR><LF>
out_index
– Number that
indicates the specific output: 1
flag
– Video Mute
0
– Video enabled
1
– Video disabled
2
– Blank picture
Get video on output status:
#VMUTE?

1 <CR>
X-AUD-LVL Set audio level of a
specific signal.
This is an Extended
Protocol 3000
command.
COMMAND
#X-AUD-LVL

<direction_type> . <port_format> . <port_index> .
<signal_type> . <index> , audio_level <CR>
FEEDBACK
~nn@X-AUD-LVL

<direction_type> . <port_format> .
<port_index> . <signal_type> . <index> , audio_level <CR><LF>
The following attributes comprise
the signal ID:
▪
<direction_type>
–
Direction of the port:
o
OUT
– Output
▪
<port_format>
– Type of
signal on the port:
o
HDMI
o
ANALOG_AUDIO
▪
<port_index>
– The port
number as printed on the front
or rear panel:1
▪
<signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type
audio_level – Audio level (range
between 0 to +100) depending of
the ability of the product
Set the output audio level to
10:
#X-AUD-LVL

out . hdmi . 1
. audio . 1 , 10 <CR>
X-AUD-
LVL? Get audio level of a
specific signal.
This is an Extended
Protocol 3000
command.
COMMAND
#X-AUD-LVL?

<direction_type> . <port_format> . <port_index> .
<signal_type> . <index> <CR>
FEEDBACK
~nn@X-AUD-LVL

<direction_type> . <port_format> .
<port_index> . <signal_type> . <index> , audio_level <CR><LF>
The following attributes comprise
the signal ID:
▪ <direction_type>
–
Direction of the port:
o
OUT
– Output
▪
<port_format>
– Type of
signal on the port:
o
HDMI
o
ANALOG_AUDIO
▪
<port_index>
– The port
number as printed on the front
or rear panel:1
▪
<signal_type>
– Signal ID
attribute:
o
AUDIO
▪
<index>
– Indicates a specific
channel number when there
are multiple channels of the
same type
audio_level
– Audio level (range
between 0 to +100) depending of
the ability of the product
Get the audio level of a
specific signal:
#X-AUD-LVL?

out . hdmi .
1 . audio . 1 <CR>
X-ROUTE
Send routing command
to matrix.
It is recommended
to use the command
#SIGNALS-LIST
to get
the list of all signal IDs
available in the system
and which can be used
in this command.
Video 1 is the default
port in this command
and is implied even if
not written:
#X-
ROUTE

out . sdi . 5 , i
n . sdi . 1 <CR>
is interpreted as:
#X-
ROUTE

out . sdi . 5 . v
ideo . 1 , in . sdi . 1 . v
ideo . 1 <CR>
This is an Extended
Protocol 3000
command.
COMMAND
#X-ROUTE

<direction_type1> . <port_type1> . <port_index1> .
<signal_type1> . <index1> , <direction_type2> . <port_type2> .
<port_index2> . <signal_type2> . <index2> <CR>
FEEDBACK
~nn@X-ROUTE

<direction_type1> . <port_type1> .
<port_index1> . <signal_type1> . <index1> , <direction_type2> .
<port_type2> . <port_index2> . <signal_type2> .
<index2> <CR><LF>
The following attributes comprise
the signal ID:
▪ <direction_type> –
Direction of the port:
o
IN
– Input
o
OUT
– Output
▪
<port_format>
– Type of
signal on the port:
o
HDMI
o
HDBT
▪
<port_index>
– The port
number as printed on the front
or rear panel:
For inputs:
1
–HDBT Input
2
–HDMI Input
For output:
1
–HDMI Output
▪ <signal_type> – Signal ID
attribute:
o
VIDEO
▪ <index> – Indicates a specific
channel number when there
are multiple channels of the
same type: 1
Route HDBT IN to HDMI
OUT:
#X-ROUTE

out.hdmi.1.v
ideo.1 , in.hdbt.1.vide
o.1 <CR>