FC-10ETH –
Controlling Machines via the Ethernet using the FC-10ETH
15
6. Select either:
A virtual COM port if the control application cannot directly connect to
the Ethernet driver (see
U
Section 5.1.1
U
), or
An Ethernet port connection if the control application can directly
connect to the Ethernet driver (see
U
Section 5.1.2
U
)
Figure 7: Connecting the FC-10ETH in the Passive Routing Mode
5.1.1
24B
Setting a Virtual Port
If the control application cannot work with an Ethernet driver, download the Kramer
VSPM from our Web site to set a virtual port for each local port on your
FC-10ETH
.
The
Kramer VSPM
software lets you emulate virtual ports which normally would be
present in the machine hardware. After setup, the virtual port lets you control
Kramer machines via your PC.
im Vertrieb von CAMBOARD Electronics
www.camboard.de
Tel. 07131 911201
Fax 07131 911203