6
24”
(610mm)
42-1/4”
(1073mm)
68”
(1727mm)
1-3/4”
(44mm)
33-1/2”
(851mm)
46”
(1168mm)
SPECIFICATIONS
24”
(610mm)
1-3/4”
(44mm)
46”
(1168mm)
CLEARANCES
Top of unit face to header
11-
1/2” (292mm)
From unit vented/non-vented ends
1-
3/4” (44mm)
From optional decorative full door faces
1/4” (6mm)
To flooring
0” (0mm)
See-thru applications: Unit top to ceiling
33-
1/2” (851mm)
Pier applications: Unit top to ceiling
24” (610mm)
Unit side to adjacent sidewall
1-
3/4” (44mm)
Unit front to combustibles
36” (914mm)
Top of unit to 3/4” (19mm) trim
11-
3/4” (298mm)
Mantel 12” (305mm) deep from top of fireplace
12” (305mm)
SEE-THRU
PIER
WARNING
All stand-off brackets must be attached to fireplace. Do not remove. Top stand-off brackets are not load bearing.
Non-combustible zone: Top stand-offs provide 11-1/2” (292mm) minimum clearance to header. Use only non-combustible
material in this area for entire width of fireplace. Do not use wood, sheetrock etc. in this zone. Other clearances apply.
All clearances must be maintained.
IMPORTANT
Overall finished depth: 24” (610mm). This measurement includes facing material. Material used will determine rough opening depth.
This depth must not be less than 19” (482mm) to maintain non-combustible zone requirements.
Figure 6a