background image

WARNING

This conversion kit shall be installed by 

a quali

fi

 ed service agency in accordance 

with the manufacturer’s instructions and 

all applicable codes and requirements 

of the authority having jurisdiction. If 

the information in these instructions is 

not followed exactly, a 

fi

 re, explosion 

or production of carbon monoxide 

may result causing property damage, 

personal injury or loss of life. The 

quali

fi

 ed service agency is responsible 

for the proper installation of this kit. The 

installation is not proper and complete 

until the operation of the converted 

appliance is checked as speci

fi

 ed in the 

manufacturer’s instructions supplied with 

the kit.
Use this manual in conjunction with the 

installation manual supplied with the 

appliance.

Natural Gas Burner 

has two interlaced 

rows of slots

Propane Gas Burner 

marked “LPG” has 

single row of slots 

and two rows of 

small holes

534PGK/650PGK Conversion to Propane Gas

Use with Valor Horizon 534I, 534J and H4 650 Heater Models ONLY

INSTALLATION MANUAL

Horizon/H4

4002603-04

©2024, Miles Industries Ltd.

Once converted to LPG, this appliance is certi

fi

 ed for 

use from 0-4,500 feet. For altitudes above 4,500 feet, 

see local codes.

Kit Contents

• 1 Pilot injector (marked 27)

• 1 Burner

• 1 Injector (marked 260)

• 1 Set of conversion labels

• 1 Set of air shutters

Tools Required

• Wrenches, to disconnect gas line
• Phillips (+) screwdriver, to remove burner module & 

pilot shield

• Small (jewelers size) 

fl

 at blade screwdriver, to set 

the pressure

• Small 

fl

 at blade screwdriver, to release pressure tap 

on valve

• Needle nose pliers, to remove bypass screw
• Hex (Allen) wrench, 4 mm or 5/32”, to remove pilot 

injector

• Manometer, to set pressure

Rating

Maximum 24,000 Btu/hr
Minimum 13,000 Btu/hr

General Notes Regarding Conversion

The conversion may be done before or after the 

appliance is installed into the cavity. However, the gas 

must be connected to set the manifold pressure.

Reviews: