Remote Control Operation
SECTION 10
OPERATING INSTRUCTIONS
#SP-41-L
R.6 February 2022
41
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
10.8.8 Flame Adjustment
This control system has (5) flame levels. Flame height will not be
adjustable for the first (10 )seconds when the appliance is turned ON.
The control system will remember the previous flame level setting
and will automatically adjust after (10) seconds.
To adjust the flame level,
1. Press the MENU button to activate the menu.
2. Using the UP and DOWN arrows, highlight the FLAME icon and
press SELECT.
3. Use the UP and DOWN arrows to adjust the flame level to desired
setting, then press SELECT.
•
The transmission indicator icon will flash and a single beep will
confirm the reception of the command.
10.8.9 Thermostat Operation
The remote control can operate as a room thermostat. The thermostat
can be set to a desired temperature to control a room’s comfort level.
This control system requires a two degree Fahrenheit or higher
temperature difference between the room temperature and set
temperature for the fireplace to turn on.
The system will remember the previous temperature setting when
thermostat mode is cycled ON or OFF.
To activate this function,
1. Press the MENU button to activate the menu.
2. Using the UP and DOWN arrows, highlight the THERMO icon and
press SELECT.
3. Use the UP and DOWN arrows to turn the THERMO ON or OFF,
then press SELECT. The SET TEMP will start blinking. Using the
UP and DOWN arrows, select the desired temperature and
press SELECT.
•
If the thermostat function is on, the set temperature can be
adjusted at any time by pressing the UP and DOWN arrows.
•
As the room temperature approaches the set temperature, the
remote system will automatically adjust the flame height.
•
If the room temperature rises above the set temperature, the
fireplace will shut down the main burner. The fireplace will
turn back on after the room temperature drops below the set
temperature.
10.8.10 Fan Speed Control (optional)
The fan speed can be adjust through (3) speeds: HIGH, MEDIUM, LOW.
The fan is controlled by a timer built into the control module. After
the fireplace is turned ON, the timer will wait for (3) minutes before
turning on the fan. After the fireplace is turned OFF, the fan will
remain on for (12) minutes.
To activate this function,
1. Press the MENU button to activate the menu.
2. Using the UP and DOWN arrows, highlight the FAN icon and
press SELECT.
3. Use the UP and DOWN arrows to adjust to desired fan speed,
then press SELECT.
•
The transmission indicator icon will flash and a single beep will
confirm the reception of the command.
