Nailing Tabs Installation
SECTION 3
FRAMING
#SP-41-L
R.6 February 2022
13
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
3.3 Nailing Tabs Installation
NOTE: The nailing tabs on both sides of the appliance allow installations
for a flush mount, 1/2” (13mm) facing material, or 5/8” (16mm) facing
material.
CAUTION: Never permanently remove these assemblies from the
fireplace—they must be secured regardless of finish material used.
1. Locate the nailing tabs on the right and left sides of the fireplace
necessary to accommodate the thickness of your facing material.
2. Bend out the (4) nailing tabs until parallel with fireplace face. Do
not bend toward fireplace face.
3. When installing, center the fireplace in the rough opening
to allow for the minimum 1/4” (6mm) clearance from the
appliance corners.
4. Secure the appliance to the framing studs by using nails or
screws through the nailing tabs.
Flush mount
1/2” facing material
5/8” facing material
Flush mount
1/2” facing material
5/8” facing material
FIGURE 3.2
Nailing Tab Installation
