FIREPLACE SETUP
25
8.4 #NCL-028 Optional Fan Kit
WARNING - Electrical Grounding Instructions: This appliance
is equipped with a three-prong (grounding) plug for your
protection against shock hazard and should be plugged directly
into a properly grounded three-prong receptacle. Do not cut or
remove the grounding prong from this plug.
WARNING: Installation of this fan kit should be done by a
qualified installer. Verify household breaker is shut off prior to
working on any electrical lines.
NOTE: It easier to install the fan kit before connecting the gas
line to the control board.
• This appliance, when installed, must be electrically grounded
in accordance with local codes, or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA 70, or
the Canadian Electrical Code, CSA C22.1.
1. Remove safety barrier and glass frame assembly.
2. Insert fan through the right side of lower grill opening, and
push to the back wall of the fireplace.
3. Plug cord into receptacle on module housing.
4. Reinstall the glass frame assembly and safety barrier.
CONTROL MODULE HOUSING
Figure 8.3, Optional Fan Kit Wiring
