kozy heat MINNETONKA 55345, Инструкция по установке и эксплуатации

Страница: 27 / 39

Page 26
8. Push in the control knob all the way and hold in. Press the BLACK piezo igniter button (B).
The pilot will generally light with two or three pushes on the igniter. Hold the knob in for about one (1) minute after the pilot is lit.
Release knob and it will pop back out. Pilot should remain lit. If it goes out, repeat steps 4 through 8.
*If knob does not pop out when released, stop and immediately call your service
technician or gas supplier.
*If the pilot will not stay lit after several tries, turn the gas control knob to "OFF" and
call your service technician or gas supplier.
9. Push the control knob on the gas valve in slightly and turn
Figure 21
counterclockwise to the "ON" position.
10. The burner can now be turned ‘ON’ or lit by depressing the
ON/OFF rocker switch (C) located beside the valve OR by setting
the thermostat or remote control to the desired setting.
11. NOTE: When the unit is initially lit, condensation will appear on the glass,
this is normal in all gas fireplaces, and will disappear in one to three minutes.
TO TURN THE BURNER OFF:
To turn the burner ‘OFF’, depress the ON/OFF rocker switch to ‘OFF’, flip ‘off’ the wall switch or adjust the setting on the thermostat or
remote control. NOTE: The pilot will stay lit.
TO TURN THE PILOT OFF:
To turn off the pilot, push in and turn the control knob to the "OFF" position. DO NOT FORCE.
WARNING: This control valve has an interlock device. After turning off the pilot, it cannot be relit until the thermocouple has cooled,
(approximately 60 seconds).
NOTE: A PAINT SMELL WILL OCCUR DURING THE FIRST FEW HOURS OF BURNING. IT IS RECOMMENDED TO LEAVE THE FAN OFF
DURING THIS PERIOD AS THIS WILL SPEED UP THE PAINT CURING PROCESS.
INITIAL BURN PERIOD
DUE TO THE MAKEUP OF THE FIBER LOGS & REFRACTORY, THE CURING PROCESS MAY TAKE UP TO 4 HOURS OF BURN TIME. DURING
THIS PERIOD, THE LOGS & REFRACTORY WILL DISCOLOR, BUT WILL RETURN TO THEIR TRUE COLOR ONCE THE CURING PROCESS
IS COMPLETE. DO NOT BURN THIS FIREPLACE WITHOUT THE GLASS PROPERLY IN PLACE.
**MAKE SURE THE HOMEOWNER IS AWARE OF THIS**
NOTE: Children and adults should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing
ignition. Young children should be carefully supervised when they are in the same room as the appliance.
Clothing or other flammable material should not be placed on or near the appliance.
NOTE: THIS FIREPLACE MAY PRODUCE NOISES OF VARYING DEGREE AS IT HEATS AND COOLS TO DUE METAL
EXPANSION AND CONTRACTION. THIS IS NORMAL AND DOES NOT AFFECT THE PERFORMANCE OR
LONGEVITY OF THE FIREPLACE.