Page 21
LOG INSTALLATION
The MTK-500 log set includes 12 logs, 1 bag klinkers & 2 pkgs. rock wool burning embers. The logs are numbered on the bottom
side - refer to the instructions below for proper placement.
1. Position base log #1 onto the burner setting the backside of
the log against the flange at the back. Pull the log forward
approximately ½". DO NOT ALLOW THE LOGS TO COVER
THE PORT HOLES ON THE BURNER. Figure 17A.
1. Position base logs #2 - #6 onto the burner as shown in Figure
17A. NOTE: There are (2) #6 logs and no #5 log.
Figure 17A
1
2 6
3
6
4
3. Brush rockwool burning embers onto the burner and place klinkers
onto the burner as shown in Figures 17B & 17C.
Figure 17B Rockwool burning embers
Figure 17C - Klinker Installaton
4. Position logs #7, #8, #9 onto base logs, aligning the holes in the
logs to the protrusions on the base logs. Refer to Figure 17D.
5. Set logs #10 & #11 into position as shown in Figure 17D below.
7 8
9
10
11
Figure 17D
6. Align the mounting hole in top log #12 to the protrusion in log
#8 and align the notched out section in log #12 to the log grate.
Refer to Figure 17E.
Figure 17E
12
Rockwool / Klinker close-up
Содержание MINNETONKA 55345
Страница 38: ...Page 37...
Страница 39: ...Page 38...
