kozy heat MINNETONKA 55345, Инструкция по установке и эксплуатации

Страница: 25 / 39

Page 24
4. Replace the glass.
A) Place the glass assembly onto the front of the fireplace and secure with the spring-loaded handles FIRST AT THE TOP,
THEN AT THE BOTTOM of the firebox. CAUTION: TO PREVENT THE GLASS ASSEMBLY FROM FALLING OFF WHEN
INSTALLING ON THE FIREPLACE, SECURE THE TOP GLASS LATCH BRACKETS FIRST, THEN THE BOTTOM.
WARNING: DO NOT OPERATE THIS FIREPLACE WITH THE GLASS ASSEMBLY REMOVED,
CRACKED OR BROKEN. Replacement of the glass assembly, part #TRF-007T
should be done by a licensed or qualified service person.
5. Upper louver, Hood & Lower Grill Installation - Refer to Figures 20A - 20C.
A) Align the hooks (A) in the upper louver to the slots
located in the face of the fireplace and set down into
position. Figure 20A.
B) Insert the flange at the top of the upper hood into the
clips located in the top of the upper air passage.
NOTE: This is a fairly tight fit. Figure 20B
C) Partially thread the (2) screws included in the
components packet into the nuts (B) at each end of
the lower grill as shown in Figure 20C.
D) Place the lower grill into the lower grill opening and
secure to the fireplace by threading the screws into
the corresponding holes in the inside flange of the
lower grill opening. The lower grill can now be
opened and closed to access the gas valve and
controls.
Remove:
A) Grasp the bottom of the upper hood at each end and
pull the hood out of the clips at the top of the air
passage.
B) Lift the upper louver up out of the slots and remove
from the fireplace.
C) Remove the screws securing the lower grill at each
side and remove from the fireplace.
Figure 20A
Figure 20B
Figure 20C
Thread screws into nuts on
each end of grill and secure
to lower grill opening
Upper Hood & Lower Grill Installed