kozy heat Chaska-34 LOG, Инструкция по установке и эксплуатации

Страница: 16 / 33

7.2 #CK34-500 Log Set Installation
CAUTION: Do not place logs directly over burner port holes.
Improper log placement may affect flame appearance and may
cause excessive soot to build upon the glass.
• If converting to LP (propane) gas, complete the conversion
before installing the log set. Follow the conversion
instructions included with the kit.
• Log numbers are located on the bottom of each log. Refer
to following instructions and illustrations for proper log
placement.
1. Position the ember panel in front of the burner as shown
Figure 7.2.
2. Align the two (2) holes in the bottom of log 1CK with the two
(2) mounting pins at the back of the burner. Push the log
down onto the pins to seat. Repeat for log 2CK.
3. Align the holes on the bottom of logs 3CK and 4CK with
mounting pins on burner. Push the logs down onto the pins
to seat. See Figure 7.3.
4. Align log 5CK with the notches in logs 1CK and 3CK.
5. Align log 8CK with the notch in log 4CK.
6. Position logs 6CK and 7CK as shown in Figure 7.4.
Figure 7.2, Logs 1CK & 2CK
Figure 7.3, Logs 3CK & 4CK
Figure 7.4, Completed Installation
18