24
9.2 Temperature Display
With the system in OFF position, press thermostat key and mode
key at the same time to change from degrees °F to degrees °C.
Look at the LCD screen on the remote control to verify °C or °F
is visible on the right side of the Room Temperature display.
9.3 Key Lock
This function locks the keys to avoid unsupervised operation. A
lock icon will appear on the LCD display screen once activated.
To Activate
: Press the mode key and up key at same time.
To De-activate:
Press the mode key and up key at same time.
9.4 Turn ON/OFF the Appliance
9.4.1 Turn ON the Appliance
1. With the system in OFF position, press the remote control
ON/OFF key to turn ON the appliance. A single ‘beep’ from
the IFC module will confirm reception of the command.
2. The remote control LCD screen will show all active icons
and the IFC module will be commanded to start the ignition
sequence.
9.4.2 Turn OFF the Appliance
1. With the system in ON position, press the remote control ON/
OFF key to turn OFF the appliance. A single ‘beep’ from the
IFC module will confirm reception of the command.
2. The remote control LCD screen will only show the room
temperature and its icon, and the IFC module will be
commanded to turn off the appliance burner.
9.5 Remote Control Flame Adjustment
The control system has six (6) flame levels.
1. With system in ON position and the flame level at maximum,
press the down arrow key once to reduce flame height by
one step until flame is turned off.
2. Press the up arrow key once to increase flame height by
one step. If the up arrow key is pressed while system is on
but the flame is off, the flame will come on in ‘HI’ position. A
single ‘beep’ will confirm reception of the command.
When the smart thermostat operation is activated, manual flame
height adjustment is disabled.
9.6 Remote Control Thermostat
Operation
9.6.1 Room Thermostat
The remote control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control a
room’s comfort level. To activate this function,
1. Press the thermostat key. The LCD display will change to
show the room thermostat is ON, and will display the set
temperature and temperature bulb graphic.
2. To adjust the set temperature, press the up or down arrow
keys until the desired set temperature is displayed on the
LCD screen.
9.6.2 Smart Thermostat
The smart thermostat function adjusts the flame height based
on the set temperature and the actual room temperature. As the
room temperature gets closer to the set point, the smart function
will automatically adjust the flame down. To activate this function,
1. Press the thermostat key until the word ‘SMART’ appears on
the right side of the temperature bulb graphic.
2. To adjust set temperature, press the up or down arrow keys
until the desired set temperature is displayed on the LCD
screen.
SET TEMPERATURE
ROOM TEMPERATURE
Flame Off
Flame Level 1
Flame Level 5
Flame Level Maximum
Figure 9.3
Figure 9.4
Figure 9.5
Figure 9.6
Figure 9.7
Содержание Chaska-34 LOG
Страница 32: ......
