Seaview Square Fire Pit Table
WDC-SEA-FP-TOP&WDC-SEA-FP-BASE
Assembly Instructions
Step 1: Remove all protective materials and check all component pieces against parts
list.
Step 2: Place the table top on a flat surface to start assembly.
Step 3: Screw all the bolts E to top A and tight the bolts(photo1), attach the base B to
top A,then attch washer, lock washer and nut(photo2) .
Step 4: Lock all the nuts.cover all PE caps.
Step 5: Put D into A and connect D with your LP tank very carefully. please read
attachment Operation and Warning First .
Step 6: Open the fire beads box K and put the fire beads into the burner, you can put
as much as you want.
Step 7: Please put the Top cover C on top A when the burner turn off so you can use it
as a normal table.
page 1 of 2
photo 3
photo 4
photo 2
photo 1
page 1 of 2