kozy heat CAMBRIDGE CMB-31, Инструкция по установке и эксплуатации

Страница: 17 / 34

Page 15
(1) Upper Hood
(1) Lower grill
ASSEMBLE THE SHROUD - Figure J-1
1. Attach the upper hood to the shroud top piece by
aligning the holes on the top flange on the hood to the
corresponding mounting holes on lower inside flange of
the shroud top piece. Secure with (2) 3/8" phillips head
screws (A), provided.
2. Secure the right and left shroud pieces to the top piece
by aligning the (2) holes in the side pieces to the holes in
the top piece. Secure with 3/8" phillips head screws
provided (2 ea. side) (B).
ATTACH THE SHROUD - Figure J-2
1. Align the slotted holes located on the inside flange of the
shroud side pieces to the threaded mounting nuts
located on the inside side flanges on the insert. NOTE:
There are (2) for each side.
2. Secure the shroud by inserting (1) 3/4" phillips head
screw through the slotted holes and into the threaded
mounting nuts. Do not tighten at this time.
3. Adjust shroud so that is sets against the fireplace face
finish material, then tighten the screws to secured in
position.
INSTALL THE LOWER GRILL - Figure J-2
1. Align the threaded mounting holes on each side of the
lower grill to the corresponding mounting holes on the
inside flange of the shroud side pieces and secure with
the (2) 1" phillips head screws, provided. (1 each side.)
Figure J-1
NOTE: Screws (A) & (B) are secured
from the bottom
.
Figure J-2 - Lower left side of insert and shroud shown.
Secure shroud with ½" phillips
head screws. (2) each side.
Secure lower grill with 1"
phillips head screw. (1 each side.)