DIAGNOSTICS / TROUBLESHOOTING
H325 IAE
Rev.: 004
kortho
QiC i-series
9-19
3.
To confirm the new calibration settings, touch the screen. Alternatively wait for 30 seconds and
the control unit will reload the previous calibration setting.
9.4 Fault finding
9.4.1 Control unit
Fault indication
Symptom(s)
Action(s)
Control unit does
not power up.
Blue power LED on
the coding unit
Check whether the mains voltage is present.
Check whether power cable connector is properly connected to
remains off
Control unit and mains power supply.
Check whether the power cable is not damaged.
The user interface
remains dark
Check whether ON-OFF switch is in the position I.
These actions should only be performed by qualified
personnel.
Disconnect power cable (X1) from mains power supply first!
Ethernet LED’s
(visible at the back)
remain off
Check the fuses in the power entry module (X1).
Check whether internal mains wiring is connected properly.
Control unit does
not boot up.
Blue power LED on
the coding unit is lit
These actions should only be performed by qualified
personnel.
Disconnect power cable (X1) from mains power supply first!
The user interface
remains dark
Check whether the power cable of the user interface panel is
properly connected.
Check whether user interface panel-flat cable is not damaged.
Check whether a "burning smell" is present in control unit. If so,
contact your local dealer.
Control unit does
not boot up.
Power LED on the
coding unit is lit
These actions should only be performed by qualified
personnel.
Disconnect power cable (X1) from mains power supply first!
Touch screen is
backlit
Check whether a "burning smell" is present in control unit. If so,
contact your local dealer.
Touching the
buttons on screen
will not result in a
proper response
The screen calibration is incorrect. Recalibrate the screen, see
section9.3
The label cannot be
downloaded to the
system.
The label file on the USB thumbdrive may be corrupt. Ensure
when transferring information that the flash device is removed
properly.
Check whether the label is ok by opening it in the label design
program. Alternatively create the label again and try to
download it again.
If the problem remains present contact your local dealer.
Содержание qic i series
